MAG and Formuler
MAG box IPTV setup
MAG box IPTV setup is the one installation with nothing to download. Your box's hardware address goes on our list, a single portal address goes into its menu, and after a reboot the channels are there. Allow about 7 minutes.
who runs BestIPTVProvider UK
MAG steps
MAG box IPTV setup by portal URL
Before you begin: an active plan, the box cabled to the router if possible, and the remote in hand.
Locate the MAC address
Turn the box over and read the sticker, or open Settings > System settings > Device info (just Settings > Device info on recent firmware). It always starts 00:1A:79.
On WhatsApp, send the MAC address of the MAG box plus your order number. Once it is linked to your plan, we reply with your personal portal address.
Type in the portal address
- ·Settings > System settings > Servers > Portals (on recent firmware: Settings > Servers > Portals).
- ·'Portal 1 name': a label of your choice, such as BestIPTVProvider UK.
- ·'Portal 1 URL': exactly what we sent, every character.
- ·Save and use the menu's restart option; switching off at the plug may discard the entry.
Reboot and wait a moment
Each time it powers up, the box contacts our portal. On the first boot it fetches the channel groups, the programme guide and the on-demand sections.
Match the video output to the TV
Settings > System settings > Video > Video output mode. A Full HD set takes 1080p; a 2160p mode only makes sense with a 4K MAG on a 4K TV. Save, and the box restarts itself.
HD-only MAGs top out at 1080p. Models that go further say UHD or 4K on the label or spec sheet.
Formuler
On a Formuler: MYTVOnline
Formulers use the identical idea. We register the hardware address, you paste the portal into MYTVOnline, and the app takes over.
Launch MYTVOnline
It comes pre-installed on Z and S series Formulers, with its own tile on the home screen.
Note the MAC address
Settings > Network or About shows it, as does the sticker underneath. The format is 00:1A:79:XX:XX:XX.
On WhatsApp, send the MAC address of the Formuler plus your order number. Once it is linked to your plan, we reply with your personal portal address.
Enter our portal in MYTVOnline
- ·MYTVOnline > Settings > Portals (some versions call the option 'Add playlist').
- ·Choose 'Stalker / Portal' as the type and paste in the address from our reply.
- ·Save and reopen MYTVOnline.
MYTVOnline can also run on an M3U link. Let us know if you would rather have that.
Reboot and wait a moment
Each time it powers up, the box contacts our portal. On the first boot it fetches the channel groups, the programme guide and the on-demand sections.
Small things, big difference
Settings to check on any MAG box
Wire it to the router
MAG boxes were built around an Ethernet socket, and a good number of older ones cannot join Wi-Fi at all. The cable also gives the steadier picture.
Pick an output your TV accepts
System settings > Video holds the Video output mode. Choose one the television supports; a mismatch shows as black borders, a stretched image or a 'no signal' message.
Choose the UK time zone
With the wrong zone the guide runs an hour or more off. The UK setting moves between GMT and BST on the correct dates by itself.
Accept firmware updates
Out-of-date firmware sometimes trips over a current portal. The update entry lives in the system settings.
FAQ
Set-top box questions we get
My MAG shows 'portal unavailable'. Now what?
Can I set up a MAG without Wi-Fi?
Is there a TV guide on a MAG box?
What if I can't find the MAC address?
Should I buy a MAG or a Fire TV Stick?
How MAG box IPTV setup works behind the scenes
Think of the portal as a front door with a guest list. Each time the MAG powers up it knocks, and our server checks the MAC address against the list of active plans. If the address is on it, the door opens and the box receives the channel groups, the guide and the on-demand library. That is why the MAC address is the only thing we need from you, and why renewing a plan changes nothing on the box itself.
Who gets on well with a MAG
Anyone who finds app menus a chore. An older relative can switch on, press a number and be watching the evening news or a match, with a remote that behaves like the ones they have always had. If the same portal approach appeals but you would rather use a phone or a stick, STB Emu imitates it on Android; its steps are in the device picker on how to set up IPTV.
Setting the picture output
With channels on screen, spend one minute on the output. Open System settings, go to Video and select the Video output mode that suits the television: 1080p for a Full HD set, or one of the 2160p modes when the box and the TV are both 4K. The MAG restarts in the new mode. On an HD-only MAG there is nothing to change.
To register the portal we need two things: your MAC address and an active plan. Compare plan lengths on IPTV subscriptions, or begin with the paid IPTV trial UK month. Setting up a second TV with a stick instead? See the guide to the best IPTV for Firestick.
Message on the screen you don't recognise?
Photograph it, add the model from the sticker underneath, and WhatsApp both to us. We work through it together.
Message us on WhatsApp